home *** CD-ROM | disk | FTP | other *** search
- Path: odo.PEAK.ORG!not-for-mail
- From: ridgwad@PEAK.ORG (Dean Ridgway)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: 2.04 ROM CHIP Problem..
- Date: 12 Apr 1996 23:41:23 -0700
- Organization: CS Outreach Services, Oregon State University, Corvallis, OR, USA
- Message-ID: <4kniaj$9qg@PEAK.ORG>
- References: <4kkfpg$cs0@pipe10.nyc.pipeline.com>
- NNTP-Posting-Host: peak.org
-
- In article <4kkfpg$cs0@pipe10.nyc.pipeline.com>,
- john m. perez <enemy@nyc.pipeline.com> wrote:
- >I have an Amiga 500 in which I just recently attempted to upgrade to a 2.04
- >Rom Chip.. However in doing so, I have no been succesful in installing it.
- >When I place the new rom chip in the ROM socket I get no video response on
- >my monitor from my amiga. I dont have the wire on my rom chip in which
- >someone indicated that I needed? But why send me a ROM chip if it needs a
- >wire without the wire? Can someone please help me out with this delema.
- >Im trying not to give up on my amiga and its very hard to get my system
- >running. Thank you...
-
- If you have a rev 3 through 5 motherboard you need the jumper between
- pins 1 and 31 on the ROM. If you have a rev 6 or better motherboard then
- you don't need the jumper. The rev number should be silkscreened on the
- motherboard (you can also tell by looking at the expansion port
- connector but I forgot how off hand).
-
- /\-/\ Dean Ridgway | Two roads diverged in a wood, and I-
- ( - - ) InterNet ridgwad@peak.org | I took the one less traveled by,
- =\_v_/= FidoNet 1:357/1.103 | And that has made all the difference.
- CIS 73225,512 | "The Road Not Taken" - Robert Frost.
- http://www.peak.org/~ridgwad/
- PGP mail encouraged, finger for key: 28C577F3 2A5655AFD792B0FB 9BA31E6AB4683126
-